This product is no longer in production and has been replaced by FP4022-10.
The FP4022-08 was a solid performer that has been updated. The best replacement for this pump can be found at the top of this page.
If you need parts to keep your existing pump going, you can find a parts breakdown in the owner's manual. The manual can be downloaded from the Resources area below.
1-year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 3/4 HP
MAXIMUM CAPACITY: 10 GPM
FLOW at 10' LIFT and 40 PSI: 10 GPM
MAX LIFT: 25'
SHUT-OFF PRESSURE: 61 PSI
PRESSURE SWITCH SETTING: 30/50
SUCTION SIZE: 1-1/4" NPT
DISCHARGE SIZE: 1" NPT
AMP DRAW (full load): 6.1 Amps on 230v / 12.2 Amps on 115v
VOLTAGE: 230v / 115v AC, 60 Hz (set to 230v at factory)