FP4322-08
 

Print  print

Performance

Interactive Guide

Virtual house

Use our interactive water solutions guide to find products for all your home waterflow needs. Take the tour to see how our products work throughout your home.

Winterizing Your Pump

Learn helpful tips to keep your pump performing properly throughout the winter months

Contact Us

Phone, Email, or Write To Us

Find out how on our Contact Us page using the link below

Product Images

Model FP4322

Thermoplastic Convertible Jet Pump 3/4 HP

Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service.
Key Features
  • Superior performance at depths to water of 100' or less
  • Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
  • Ready-to-install 230 volt motor - see manual for 115 volt conversion
Warranty

1 year limited warranty

Specifications    
Resources    

 

BODY CONSTRUCTION:  Thermoplastic

HORSEPOWER:  3/4

MAXIMUM CAPACITY:  15.3 GPM (shallow well setup)

FLOW at 10' LIFT and 40 PSI:  13.8 GPM (shallow well setup) /

MAX LIFT:  25' for shallow setup / 100' for 4" deep setup

MAXIMUM PRESSURE:  52 psi for shallow / 66 psi for 4" deep

PRESSURE SWITCH SETTING:  30/50

SUCTION PIPE SIZE:  1-1/4" NPT

DRIVE PIPE SIZE:  1"NPT

DISCHARGE PIPE SIZE:  1" NPT

AMP DRAW (full load):  6.1 amps on 230v / 12.2 amps on 115v

VOLTAGE:  230v / 115v , 60 Hz

RECOMMENDED BREAKER:  15 amp on 230v / 20 amp on 115v

MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Owner's Manual: FP4212-08, FP4222-08, FP4312-08, FP4322-08, FP4332-08
DOWNLOAD MANUAL
Parts Listing: FP4212-08, FP4222-08, FP4312-08, FP4322-08, FP4332-08
DOWNLOAD PARTS
Specifications: FP4312-08, FP4322-08, FP4332-08
DOWNLOAD SPECS
Videos: Jet Pump Electrical Issues
WIRING YOUR PUMPCOST OF ELECTRICITY
More Resources Available for this product in our Resource Center!
Go To Resource CenterOpen Resource Center In New Window